How to Replace a Saab 9-3 Key
The Saab 9-3 has a good amount of appeal for drivers. It is a powerful engine with good visibility. It has a very high safety rating.
It is crucial to have two keys that are compatible for your vehicle. It can be costly to replace a key if you lose it.
How to Replace the Ignition Key in a Saab9-3
If your car's keys won't engage in the ignition, you need to replace it. This guide will explain how to replace the ignition key on the Saab 9-3. You'll need a replacement key, a new reprogrammable battery and a brand new key-fob case.
Most modern Saab models employ transponders instead of a traditional key to unlock the vehicle and allow it to start. The reprogrammable batteries that are in the key-fob become worn out and cannot hold any charge. This is especially relevant if you use the same key for the same lock.
The good part is that the battery can be replaced fairly easily by a professional locksmith. If you have the right tools, and a little patience, you can do it yourself. The first step is to remove the key-fob out. This is done by inserting a flathead screwdriver into the slot in the middle of the case. You must be careful, as the plastic is thin and can easily be damaged.
When the case is opened and you are able to prepare the new key by combining the lower half of the old key and the banana and transponder on the new key. This will ensure that the new key is mated to the CIM properly, which could make a big difference when replacing the only key for your Saab 9-3.
How do I replace the ignition Key on a Saab 900
If you do not have two keys, you'll have to take off the dashboard and steering wheel in order to access the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you can remove the trim and dashboard pieces around the steering wheel. Once the dash has been removed, you can insert a screwdriver into the opening in the back of the ignition switch and pull it out.
The ignition barrel is equipped with a key lock, which could prevent the vehicle from starting if it does not have the key in it. If the ignition switch on your 900 isn't working properly, you should check whether the key is in the lock or snared inside the barrel. You should also rotate your keys and keep them clean to avoid bent.
Saab cars differ from other cars because they don't use traditional metal keys. Instead, the car can recognize the key fob's electric signals through a special chip in it.
If you have lost your only working key fob, the dealer will charge you the most expensive dollar for the replacement of the computer module (known as the CIM). We can however reprogram your existing computer's EEPROM and set it to accept new keys without replacing it. This can save you over 50% of what the dealer charges! This is the SAAB Key PROGRAM. Find out more information about it here!
How to Replace the Ignition Key in a Saab9-5
The metal part of classic Saab keys is simple to duplicate and does not represent a significant risk to theft of vehicles. The real protection is the electronic component that's in the key fob, which has a chip inside which recognizes your car once it's inserted into the ignition switch.
Saab's anti-theft system has relied upon this technology for over 10 years. It's not as secure as an actual lock on the door, but it does make the act of stealing your car more difficult. That's why every Saab owner should keep an extra key available.
Most new Saabs come with two keys at the factory. However, you can purchase additional keys at a dealer through a special handheld computer, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 models, with more modern, newer features that require keys-fobs.
The dealer will replace the CIM or TWICE module in those cars if the keys are lost, and they'll charge you top dollar for the process. However, we can reprogram your EEPROM in your existing computer to accept new keys, and not replace the expensive modules.
How do I replace the ignition Key on the Saab XC90
It could be time to replace your SAAB key fob if you're having trouble turning the lock barrel. The procedure is quite simple and you don't have to visit a dealership. Instead, you can do it yourself at home using the help of a few tools.
The first step is to prepare the new key. Before you begin, ensure that the anti-theft system has been disabled by placing blocks on your rear wheels and releasing the handbrake. Then, you can put the key in the ignition and switch it to the on position that activates the accessories, but it does not start the engine. Repeat this process 5 times, and then put the key on the "on" position.
The next step is to purchase a new case for the old key fob. saab 93 key replacement g28carkeys.co.uk are available at most auto parts stores and are usually extremely affordable. Depending on the model, you can even get them without any electronics.
To open the case, gently push the flathead screwdriver into the slot in the middle. Once you split the case, you will have access to all of the internal electronic components. Use a flathead screwdriver to gently remove the electronics.